5S Components - Quality Electronic Components for Power Electronics Applications

Quality Electronic Components for Power Electronics Applications


Model # VS500B

  • These voltage sensors use the new ABB 100% electronic technology (the magnetic circuit and Hall probe are no longer required).
  • The voltage to be measured is applied directly to the primary terminals of the sensor.
  • They are specially designed and manufactured to meet the latest Traction standards.

Nominal Primary Voltage (VPN RMS)500 V
Measuring Range at ±12 V (Peak)± 750 V
Secondary Current at Vpn (mA)50 mA
Supply Voltage (VDC)±12 to ±24 V
Product TypeVoltage Sensors
Mounting TypeElectronic Technology
Measuring Range at ±24 V (Peak)±750 V
Not Measurable Overload (Peak)1500 V
Max. Measuring Resistance at ±12 V67 O
Max. Measuring Resistance at ±24 V188 O
Min. Measuring Resistance at ±24 V0 O
Accuracy at UPN= ±0.9 %
Accuracy at UPN (-25 to 70°C)= ±1.5 %
Accuracy at UPN (-40 to 85°C)= ±1.7 %
Offset Current= ±0.15 mA
Linearity= 0.3 %
Delay Time= 10 µs
dv/dt Correctly Followed= 0.6 V/µs
Bandwidth= 13 kHz
Max. No-Load Consumption Current= 50 mA
Dielectric Strength Primary/(Secondary-Screen)3.3 kV
Dielectric Strength Secondary/Screen0.5 kV
Partial Discharges Extinction Voltage> 1.1 kV
Mass0.450 kg
Operating Temperature-40 to 85 ºC
Storage Temperature-50 to +90 ºC
Secondary Connection4 x M5 studs // 3 x 6.35 x 0.8 Faston
Ordering Code1SBT160500R0001
ConformityEN50121-3-2 EN50124-1 EN50155
FeaturesMax. Common Mode Voltage The following two conditions must be continuously and simultaneously respected: 1) UHT+ + UHT- = 4.2 kV peak and 2) I UHT+ - UHT- I = UPMAX General Data Coated electronic circuit. Plastic case and insulating resin are self-extinguishing. Direction of the current : A positive primary differential voltage (UHT+ - UHT- > 0) results in a positive secondary output current from terminal M. Protections : Of the measuring circuit against short-circuits.
DetailsIncomparable protection against magnetic fields VS sensors are conceived, designed and renowned for their unrivalled immunity to ambient magnetic fields. Although they are in continuous proximity of powerful currents capable of distorting their measurements, this does not, in fact, occur. Their accuracy is rock-solid and once set to measure a particular voltage, that is what they measure - that and nothing else. Perfect efficiency in every environment The VS range has been designe

5S Components Co.

5S Components Inc is a result of a management buyout of ABB Semiconductors Inc. by John Siefken and Kenny Stephenson. Effective December 1, 2005, 5S Components became the successor to ABB Semiconductors Inc. Kurt Hoerhager, Managing Director of ABB Switzerland Semiconductors and Roland Villiger, Director of Sales, commented that “Creating 5S guarantees focus on semiconductor sales in North America, a vital part our growth strategy.

ISO Certificate

Contact Info


5S Components Co.
630 Fifth Avenue,
East McKeesport, PA 15035