5S Components - Quality Electronic Components for Power Electronics Applications

Quality Electronic Components for Power Electronics Applications


Model # HBO600

  • These sensors are designed to be fixed by the case.
  • They may be either vertically or horizontally mounted.
  • The secondary connection is made with a connector.
  • For HBO sensors the primary conductor may be a cable or a bar.

Nominal Primary Current IPN (ARMS)600 A
Secondary Voltage at IPN(V)±4 V
Measuring Range Peak (A)±1100 A
Supply Voltage (VDC)±12 to ±15 V
Product TypeCurrent sensors
Mounting TypePCB Mounting
Output Voltage at IPN±4 V
Load Resistance> 1 kO
Internal Output Resistance12 O
Current Consumption= 25 mA
Rated Voltage (rms)1500 V
Insulation Resistance> 500 V
Accuracy a.c. at IPN (±15 V)= ±1 %
Accuracy a.c. at IPN (±12 V to ± 15 V)= ±1.5 %
Output Offset (±15 V)= ±10 mV
Output Offset (±12 V to ± 15 V)= ±15 mV
Additional Offset after an Overload of IPMAX= ±10 mV
Output Offset Thermal Drift= ±1 mV/ºC
Linearity2= 0.5 %
Gain Thermal Drift= 0.05 %/ºC
Delay Time= 3 µs
di/dt Correctly Followed= 50 A/µs
Bandwidth0 to 50 kHz
Dielectric Strength Primary/Secondary (rms)3.5 kV
Mass0.200 kg
Operating Temperature-25 to +85 ºC
Storage Temperature-40 to +85 ºC
Secondary ConnectionMolex 4 pin
Ordering Code1SBT210600R0001
Over voltage category3 (OV3)
pollution level2 (PD2) Excluding the offset
FeaturesGeneral Data Plastic case and insulating resin are self-extinguishing. Fixing holes in the case moulding for two positions at right angles. Direction of the Current : A primary current flowing in the direction of the arrow results in a positive secondary output voltage on terminal Vs Primary Connection Hole for primary conductor. The temperature of the primary conductor in contact with the case must not exceed 100°C. Secondary Connection Molex HE14 4 pin connector (ref. 22
DetailsA precise response to customer expectations The HBO sensor has been designed using Open Loop Hall effect technology, thereby adding a whole new type to the various sensor technologies used by ABB. The HBO range enables ABB to offer an additional range of sensors that are suitable for less technically demanding applications and best cost competitiveness. Customers are therefore free to choose the most suitable solution for their applications. Vertical or horizontal HBO-Industry-Cur

5S Components Co.

5S Components Inc is a result of a management buyout of ABB Semiconductors Inc. by John Siefken and Kenny Stephenson. Effective December 1, 2005, 5S Components became the successor to ABB Semiconductors Inc. Kurt Hoerhager, Managing Director of ABB Switzerland Semiconductors and Roland Villiger, Director of Sales, commented that “Creating 5S guarantees focus on semiconductor sales in North America, a vital part our growth strategy.

ISO Certificate

Contact Info


5S Components Co.
630 Fifth Avenue,
East McKeesport, PA 15035