5S Components - Quality Electronic Components for Power Electronics Applications

Quality Electronic Components for Power Electronics Applications


Model # NCS165-20

  • These sensors are designed to be fixed by the case.
  • They may be either vertically or horizontally mounted.
  • The secondary connection is made with a connector or cable.
  • For NCS sensors the primary conductor may be a cable, one or several bars.

Nominal Primary Current (Peak)6000 A
Measuring Range (Peak)30000 A
Secondary Current IS1 at IPN (Peak)±20 mA
Secondary Voltage VS1 at IPN (Peak)±10 V
Product TypeCurrent sensors
Mounting TypeFrame Mounting
Opening for Primary Conductor165 mm
Not Measurable Overload (Peak) View120000 A
Secondary Current IS2 at IPMAX (Peak)±20 mA
Residual Current IS1O View= ±250 µA
Residual Current IS2O View= ±180 µA
Thermal Drift Coefficient (Outputs IS1 IS2)= ±4 µA/ºC
Measuring Resistance (Outputs IS1 IS2)0 to 350 O
Secondary Voltage VS2 at IPMAX (Peak)±10 V
Residual Voltage VS1O= ±100 mV
Residual Voltage VS2O= ±50 mV
Thermal Drift coefficient (Outputs VS1 VS2)= ±2 µV/ºC
Measuring Resistance (Outputs VS1 VS2)10000 to 8 O
RMS Accuracy 50 Hz (without offset) at IPN= ±1 %
RMS Accuracy 50 Hz (without offset) at IPMAX= ±3 %
Gain Thermal Drift (-25ºC to 85ºC)= 0.03 %/ºC
Gain Thermal Drift (-40ºC to -25ºC)= 0.1 %/ºC
Linearity (Typical)±0.5 %
Delay Time (Typical)= 3 µs
di/dt Correctly Followed= 100 A/µs
Bandwidth0 to 10 kHz
No Load Consumption Current (IA0)= 180 mA
No Load Consumption Current (IA0-)= 35 mA
Dielectric Strength Primary/Secondary5 kV
Supply Voltage (DC)±15 to ±24 V
Mass1 kg
Operating Temperature-40 to 85 ºC
Storage/Startup Temperature-50 to +90 ºC
Secondary ConnectionStraight connector 8 pin
Ordering Code1SBT200620R0001
ConformityEN50178 EN61000-6-2 EN61000-6-4
FeaturesGeneral Data Plastic case and insulating resin are self-extinguishing. Two fixing modes: Horizontal or vertical with fixing holes in the case moulding. By bar using the intermediate flange kit . Max tightening torque for M6 screws (flange mounting) : 2 N.m Direction of the Current : Output current (IS1 and IS2) : A primary current flowing in the direction of the arrow results in a positive secondary output current on terminals IS1 and IS2. Output voltage (VS1 and VS2) : A p
Details100% electronic The main advantage of the NCS range of sensors is that they are designed using a brand-new solution: 100% electronic technology. Unlike other currently available solutions such as shunts and CTs, this approach means that these sensors are very compact. Several patents were necessary to achieve this improvement. Considerable energy savings NCS sensors offer considerable savings in energy. Indeed only a few watts are required to power the NCS sensor in contrast to t

5S Components Co.

5S Components Inc is a result of a management buyout of ABB Semiconductors Inc. by John Siefken and Kenny Stephenson. Effective December 1, 2005, 5S Components became the successor to ABB Semiconductors Inc. Kurt Hoerhager, Managing Director of ABB Switzerland Semiconductors and Roland Villiger, Director of Sales, commented that “Creating 5S guarantees focus on semiconductor sales in North America, a vital part our growth strategy.

ISO Certificate

Contact Info


5S Components Co.
630 Fifth Avenue,
East McKeesport, PA 15035