2SC0108T

Supply Voltage VCC 0 to 16 V
Logic Input and Output Voltage -0.5 to 15 + 0.5 V
Max. SOx Current 20 mA
Gate Peak Current Iout -8 to 8 A
Min. External Gate Resistance 2 O
Max. Average Supply Current ICC 210 mA
Max. Output Power at Ambient Temperature less than 70 ºC 1 W
Max. Output Power at Ambient Temperature less than 85 ºC 0.7 W
Max. Switching Frequency F t.b.d. kHz
dV/dt t.b.d. kV/µs
Operating Temperature -40 to 85 ºC
Storage Temperature -40 to 90 ºC
Nominal Supply Voltage VCC 14.5 to 15.5 (typ. 15) V
Supply Current ICC 38 mA
Coupling Capacitance Cio t.b.d. pF
Supply Threshold VthC Primary Side 11.9 to 13.3 (typ. 12.6) V
Supply Threshold VthS Primary Side 11.3 to 12.7 (typ. 12.0) V
Min. Monitoring Hysteresis Primary Side 0.35 V
Supply Threshold VthC Secondary Side 17.7 to 19.3 (typ. 18.5) V
Supply Threshold VthS Secondary Side 17.2 to 18.8 (typ. 18.0) V
Monitoring Hysteresis Secondary Side 0.35 to typ. 0.5 V
Input Bias Current 190 µA
Turn-On Threshold 1.9 V
Turn-Off Threshold 1.2 V
Max. SOx Output Voltage 0.7 V
Current Through Pin VCEx 1.4 mA
Current Through Pin REFx 150 µA
Min. Response Time 500 ns
Min. Blocking Time 9 µs
Turn-On Delay td(on) 80 ns
Turn-Off Delay td(off) 80 ns
Output Rise Time tr(out) t.b.d. ns
Output Fall Time tf(out) t.b.d. ns
Transmission Delay of Fault State 450 ns
Max. Test Voltage at 50 Hz/1 min 4000 Veff
Min. Partial Discharge Extinction Voltage 1700 Vpeak
Min. Creepage Distance Primary to Secondary Side 13.8 mm
Min. Creepage Distance Secondary to Secondary Side 8.3 mm
Absolute Maximum Ratings VCC to GND Primary side, to GND Failure condition, total current Turn-on and turn-off Ambient temperature < 70 ºC Rate of change of input to output voltage
Recommended Operating Conditions VCC to GND
Electrical Characteristics Power Supply (All data refer to +25 °C and VCC = 15 V unless otherwise specified) without load Primary side to secondary side, per channe
Power Supply Monitoring Clear fault 2 Set fault 3 Set/clear fault 4 Clear fault 5 Set fault 6 Set/clear fault
Logic Inputs and Outputs V (INx) > 3 V V (INx) V (INx) Failure condition, I (SOx) < 20 mA
Short-Circuit Protection V (VCEx, VEx) < 12.5 V 2 R (REFx, VEx) < 70 kO
Electrical Insulation IEC60270
Product Highlights Ultra-compact dual channel driver Highly integrated SCALE-2 chipset Fast setup and superior adaptability Blocking voltages up to 1700 V Short delay and low jitter Gate current ±8 A, 1 W output power per channel +15 V/-8 V gate driving Interface for 3.3 V... 15 V logic level Dedicated IGBT and MOSFET Mode
Applications General Purpose Drives Uninterruptable power supplies (UPS) Solar and wind power converters Auxiliary converters for traction Electro/hybrid drive vehicles Driving parallel-connected IGBTs Switchmode power supplies (SMPS) Medical (MRT, CT, X-Ray) Laser technology
Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory! Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these stand
  • The low-cost SCALE-2 dual-driver core 2SC0108T combines unrivalled compactness with broad applicability. The driver is designed for universal applications requiring high reliability. The 2SC0108T drives all usual IGBT modules up to 600 A/1200V or 450 A/1700 V. The embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies are also supported.
  • The 2SC0108T is the most compact driver core available for industrial applications, with a footprint of only 45 x 34.3 mm and an insertion height of 16 mm. It allows even the most restricted insertion spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE-2 chipset allows about 85% of components to be dispensed with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost.
  • The 2SC0108T combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel.
  • An output current of 8 A and 1 W drive power is available per channel, making the 2SC0108T an ideal driver platform for universal usage in small and medium power applications. The driver provides a gate voltage swing of +15 V/-8 V. The turn-on voltage is regulated to maintain a stable 15 V regardless of the output power level.
  • Its outstanding EMC allows safe and reliable operation in even hard industrial applications.